Etching Machine

We offer to our clients a wide range of depth etching machines. These are substitute for engraving and laser marking machines. The machine we offer can achieve depth of around 100 - 200 micron max. We use the best grade raw material to manufacture the machine. All the machines manufactured by us are checked for quality by our team before supplying to the clients. We source all the materials from reliable vendors.

We manufacture and supply a range of semi automatic etching (marking) machines used specially for marking on flat and round jobs such as drills, taps, knives, clutches, shock-ups, engine valves, forceps, clamps, armatures and screw drivers among others. The machine is highly used for marking id number and large logos as per the requirements and specifications of the client.

 

Features and specifications:

• Appropriate for large volume production

• Dose pump controller for dosing the electrolyte

• Etching depth can be controlled within 5-40 μm by varying parameters like voltage and timer

• Base with aluminum extruded column

• Hand safety button to avoid accidents

• Single stroke and double stroke controller for consistency in marking.

• Output per hour: 300 - 400 pcs. the system can be modified by adding automation like pick and place assembly for getting higher production and consistency as well

Our range of automatic etching machines that we offer to our clients is used on round parts for circumferential marking. We manufacture these machines using the best quality raw material and offer them to our clients at the most competitive prices. The machines we offer are preferred by our clients for the following reasons as listed below:

 

• High efficiency

• Durable

• Sturdy construction

• Lower consumption of electricity

At Yugma we offer to our clients pencil etching machine which can be used for marking on hard materials like carbide, alloy steels, mild steel etc. These machines are made from the best quality material and are highly durable. We offer the machines to our clients at the most competitive prices in the industry. All our machines are tested for quality at every stage of production. This machine is similar to a pencil.

 

 

Specifications:

• 220V-240V AC, 50/60 Hz, 7-12 Watts.

• Tungsten carbide tips for long life.

• Can be used to etch on metals only.

• No Noise & vibrations.

• No Consumables required.

• Marking on dies, punches, press tools, cutting tools, jigs, fixtures, bearings, collets & to mark identification number on gauges etc.

We at Yugma are one of the leading manufacturers and suppliers of a comprehensive range of etching machines that are operated manually. These machines are available with us in three models with special features and specifications as required by the clients.

 

Yugma Mark - 1

 

Features and specifications:

• Medium Power transformer with AC Voltage regulator for controlling the etching depth.

• Etching process is limited only for black marking

• It has an user friendly controller

• Highly efficient

• Cost effective

We are the leading manufacturers and suppliers of a range of electrochemical etching machine based on electro-chemical process. In this process the stencil image is transferred to an electrically conductive product by the action of electrolyte & electricity. The etching machine can be used on all surface profiles. This can be used to mark metallic items like cutlery, drills, taps, tools, engine valves, medical instruments, sanitary hardware, gears, ball bearings and many more.

We manufacture and supply an array of consumables such as electrolytes, marking heads and photographic stencils. These are manufactured with the best quality material at the most competitive prices. We check all our products for quality before supplying to our clients.

 

 

Electrolyte:

The range of electrolyte we offer plays a key a role in the electro chemical etching process. With our expertise and experience we are able to recommend the right type of electrolyte upon the parameter of material and their properties which includes hardness, plating and coating.

 

 

Grades offered:

• Gr-I.

• Gr-II

• Gr- III and more as per their application

 

 

Marking Head:

We manufacture a wide range of marking head made of special conductive material graphite. These are available in various shapes and sizes in accordance to the requirements and specifications of the client. We use quality material to manufacture the marking heads at the most competitive prices.

 

 

Photographic Stencil:

The range of photographic stencil that we offer is used for marking numbers, dates or serial number. We also manufacture and supply a range of permanent stencil that last longer, are clean and have high resolution. On specific demand of a client we also offer stencil paper that can be printed using Dot-Matrix printer or typewriter. We also offer stencil cap that allows contrast marking to a perfect depth marking.

We are the leading manufacturers and suppliers of a range of electrochemical etching machine based on electro-chemical process. In this process the stencil image is transferred to an electrically conductive product by the action of electrolyte & electricity. The etching machine can be used on all surface profiles. This can be used to mark metallic items like cutlery, drills, taps, tools, engine valves, medical instruments, sanitary hardware, gears, ball bearings and many more.

We are the leading manufacturers and suppliers of a range of We are the leading manufacturers and suppliers of a range of electrolytic etcher based on electro-chemical process. In this process the stencil image is transferred to an electrically conductive product by the action of electrolyte & electricity. The etching machine can be used on all surface profiles. This can be used to mark metallic items like cutlery, drills, taps, tools, engine valves, medical instruments, sanitary hardware, gears, ball bearings and many more.based on electro-chemical process. In this process the stencil image is transferred to an electrically conductive product by the action of electrolyte & electricity. The etching machine can be used on all surface profiles. This can be used to mark metallic items like cutlery, drills, taps, tools, engine valves, medical instruments, sanitary hardware, gears, ball bearings and many more.

We are the leading manufacturers and suppliers of a range of Metal Etching Kit based on electro-chemical process. In this process the stencil image is transferred to an electrically conductive product by the action of electrolyte & electricity. The etching machine can be used on all surface profiles. This can be used to mark metallic items like cutlery, drills, taps, tools, engine valves, medical instruments, sanitary hardware, gears, ball bearings and many more.